you're currently reading the news digest published from 23 Oct 2023 to 30 Oct 2023

of-interest1
video1
press22

featured

Science | A prize-winning story of metallic melting in tokamaks

An obvious property of metals is that they melt, and metallic components directly facing the plasma are one thing ITER has a whole lot of. A total surface area of about 800 m² to be more precise. What happens when they do melt was in the spotlight at the recent 29th IAEA Fusion Energy Conference when a paper focusing on the physics of transient-heat-pulse-induced melting was awarded the prestigious Nuclear Fusion prize for 2023.  In its 2016 baseline configuration, the ITER machine features beryllium-armoured first wall panels in the 'main chamber' region (~650 m²), with another ~140 m² of tungsten targets in the divertor area at the bottom of the vacuum chamber, where more than 90 % of the plasma thermal and particle exhaust will be intercepted. Beryllium has two very important advantages from the point of view of ITER operation. It is an excellent getter for oxygen, reducing the level of impurities in the vacuum vessel, making plasma start-up easier. And even more importantly it is a low atomic number material, so that burning plasmas are much more tolerant to wall atoms eroded by plasma particle impact that make their way into the hot core. Unfortunately, this beneficial property comes with the price of a quite low melting temperature (1287 °C), as well as a low threshold for sputter erosion and a high propensity to trap fusion fuel (deuterium and tritium) in the deposited layers which will grow on plasma-facing surfaces as a result of this erosion.  In contrast, tungsten is a remarkable material in terms of robustness and has the highest melting point (3422 °C) of all known elements, an elevated energy threshold for sputtering, and negligible fuel retention issues in comparison with beryllium. These are the principal reasons for deploying it in the divertor region, where steady heat and particle fluxes are extremely high. It does, though, have one serious drawback: as a very high atomic number material, only very small concentrations will be tolerable in ITER's fusion plasmas before the burn is compromised. Nevertheless, tungsten is the most widely favoured candidate in most magnetic confinement fusion reactor designs, and the long-term objective of ITER has always been to operate eventually with tungsten as sole plasma-facing material after starting first nuclear operations with beryllium main wall armour to ease the pathway to burning plasmas. In view of technical issues which have arisen during machine construction, this long-term plan is now being brought forward in a new proposal currently under development at the ITER Organization to go 'full-tungsten' from the very beginning of operations. A review of this proposal was the sole objective of last month's STAC meeting (ITER Council Science and Technology Advisory Committee) held at ITER Headquarters. But even the lofty tungsten melting temperature is no match for the reactor-scale plasmas ITER will explore. Thermal energies in ITER fusion plasmas (up to ~350 MJ) and energy stored in the magnetic field (up to ~600 MJ) when operating at high plasma current dwarf those accessible in smaller research tokamaks. Uncontrolled releases of this energy—for example during fast transient magnetohydrodynamic activity and plasma disruptions, or in cases of slow power flux excursions to the divertor targets—can melt even tungsten surfaces. This is a result of the specific character of magnetically confined plasmas: the energy is focused onto very local areas due to the geometry of the magnetic field so that energy densities can be extremely high.  ITER will be equipped with a very sophisticated plasma control system and a barrage of mitigation systems to intercept high-energy transients, but it is not credible to imagine that all possible events can be avoided or mitigated over a decades-long machine lifetime. While not posing a threat to machine integrity, these off-normal heat fluxes can locally modify the surface topology of impacted plasma-facing components and, in the worst cases, require replacement—not an operation to be undertaken lightly or frequently in a device of ITER's scale and complexity. In fact, tungsten melting in tokamaks is rather different than what would be found in most other situations. At melting temperature, tungsten is a very strong electron emitter (the phenomenon of thermionic emission). When a melt layer forms on a tungsten plasma-facing component, thermionic electrons emitted from the surface towards the plasma leave behind a positive charge, which is neutralized by an electric current (the 'replacement current') flowing through the component and the molten layer. These currents can be enormous, easily in the range of millions of amperes per square metre. If they flow across the strong tokamak magnetic fields, Lorentz forces can then drive very rapid melt acceleration (hundreds of metres per second squared). Not only does the surface melt, but the melt layer can be swept over large surface areas. What then does the affected material surface look like topologically, how resilient will it be to subsequent power loading and how much damage can be tolerated before repair is required? Answering such questions has been a priority at the ITER Organization in recent years. The tokamak community has been long been aware of the issue, but it has lacked a quantitative, experimentally benchmarked framework to make predictions at the reactor scale. Pioneering experiments on deliberate tungsten melting and melt motion under steady heat loading were performed in the TEXTOR tokamak nearly a decade and a half ago, but it was only in 2014 that the first experimental demonstration of 'controlled' rapid transient tungsten melting in a tokamak was achieved at JET in a series of tests performed in collaboration with ITER. Numerical simulations were attempted of both the TEXTOR and JET experiments using a melt code (MEMOS-3D) developed at the Karlsruhe Institute of Technology (KIT). Results were reasonable, but something better was required to be confident of extrapolations to ITER. Enter a team led by 2023 Nuclear Fusion prize laureate Prof. Svetlana Ratynskaia from the Space and Plasma Physics Division of the Royal Institute of Technology, Stockholm (KTH). They were approached by the ITER Organization in January 2016 at an International Tokamak Physics Activity (ITPA) Topical Group meeting in Frascati, Italy, and asked to consider joining the effort to improve the framework for melt predictions.  Experts in many detailed theoretical aspects of plasma-material interactions, but not previously involved in tokamak melt simulations, they accepted the challenge and what followed has been an outstanding example of how the fusion research community can mobilize to address key issues for ITER. Supported in part by the ITER Organization through contracts and co-sponsorship of graduate students, together with funding from EUROfusion and the Swedish Research Council, the KTH team began by refining and adding physics to the KIT simulation tool, guided by results from the older JET exposures and new similar, but better diagnosed, experiments on ASDEX Upgrade. The result was the MEMOS-U code, providing a unified description of metallic plasma-facing component melting in magnetic confinement devices, summarized in the Nuclear Fusion prize-winning paper, just one of the very many journal articles which have emerged from this multiyear effort. And the work goes on. The physics models describing melting and melt motion have been subject to yet more experimental tests in the past two years on the ASDEX Upgrade, WEST and DIII-D tokamaks, now coordinated through a multi-machine ITPA activity. In parallel, the KTH team has used the improved understanding gained over the years since their first involvement to produce a completely new, modern and flexible modelling tool (the MEMENTO code) which is being applied successfully to the interpretation of the most recent melt experiments and will be applied to others still being planned. This new framework is also now being employed as the main predictive tool for the assessment of gross topological erosion due to transient-induced armour melting on ITER, closing the loop on this truly global effort in support of ITER and providing a key modelling framework for similar assessments at the fusion reactor scale. Journal article reference: Ratynskaia, S., Thorén, E., Tolias, P., Pitts, R.A., Krieger, K., Vignitchouk, L., Iglesias D., the ASDEX-Upgrade team, the JET contributors, and the EUROfusion MST1 team (2020). Resolidification-controlled melt dynamics under fast transient tokamak plasma loads. Nuclear Fusion, 60. https://iopscience.iop.org/article/10.1088/1741-4326/abadac

Visit | California lawmakers and environmentalists explore ITER

Members of the California Foundation on the Environment and the Economy (CFEE) travel the world to study the most significant initiatives in terms of environmental preservation and innovation. A journey to Sweden and Norway to examine advances in carbon capture and storage. To Iceland, to study geothermal energy production. To Japan, to understand the emergence of high-speed rail projects. To Australia, to explore best practices in transportation infrastructure and water resource management. To the Netherlands, to learn about floodwater management. On Tuesday 24 October, ITER became the latest study destination for this singular group composed of California state legislators (8 from the Senate, 4 from the lower house) and representatives from public utilities, oil and gas companies, renewable energy producers, trade unions, manufacturing, and the California Energy Commission. Leading the group of 38 was Jay Hansen, the president of CFEE and a long-time environmental advocate and strategist who has made it his mission to show leading influencers what can be done to fight climate change and promote positive change. Being Californians, the group was well aware of the latest advances in fusion, such as the recent breakthrough at the National Ignition Facility (NIF), located to the east of the San Francisco Bay at the Lawrence Livermore National Laboratory, or the contribution to ITER from San Diego-based General Atomics. During the presentation by ITER Head of Communication Laban Coblenz and all through the site visit, the questions were many and to the point: What is fusion's timeline to commercialization? How to develop the interactions of public and private fusion initiatives? What is the economic outlook for fusion? And a final question: how can individuals with their varied backgrounds help support fusion research?

of-interest

First plasma at JT-60SA!

The Europe/Japan team at the JT-60SA tokamak in Naka, Japan, succeeded on 23 October 2023 in producing a tokamak plasma for the first time. The team issued the following statement:  "This is a major achievement by the teams involved in the operation of the biggest experimental fusion device to date using magnetic confinement. The result will be carefully examined as the teams will continue to perform more tests during the next weeks. This will culminate on 1 December when the newly built fusion research facility will be officially inaugurated in Naka in the presence of delegates from Japan and Europe. Stay tuned for further updates!" See the press release in Japanese issued by Japan's National Institutes of Quantum Science and Technology (QST) and the article published by the European Domestic Agency, Fusion for Energy.

video

Massive ring-shaped coil goes into storage

press

Росатом приступил к отправке 30-й партии электротехнического оборудования для ИТЭР

Multipliant les revers, le méga projet de fusion nucléaire ITER veut prendre un nouveau départ (réservé aux abonnés)

텅스텐, 인공태양을 위한 소재로 선택된 이유

国际热核聚变实验堆(ITER)组织主机安装负责人一行赴核聚变中心交流

One of the largest superconductive magnets completed and delivered

Addressing ITER's great challenges

Call for the organization of the 2024 FuseNet PhD event

Des nanoparticules de tungstène produites par les plasmas de tokamak

Tungsten nanoparticles produced by tokamak plasmas

The Challenges of Developing a Fusion Power Plant: and How Chemical Engineers are Helping Make STEP a Reality

Sixteen EUROfusion Engineering Grants awarded to outstanding early-career engineers

Tokamak o Stellarator: quale strada ci porterà all'energia delle stelle?

일본 QST, 핵융합 실험 장치서 플라스마 실현 성공

Warum künstliche Intelligenz in der Fusionsforschung an Bedeutung gewinnt

Why artificial intelligence is gaining importance in fusion research

Japan's fusion power project reaches plasma milestone

核融合反応に必要な"プラズマ"生成に初成功 茨城の実験装置

First Tokamak plasma for JT-60SA

Silicon Valley bets on nuclear fusion coming soon

Britain is a fusion superpower, but it must not bet all on the wrong technology (paywall)

JT-60SA初のプラズマ生成に成功~日欧で取り組む幅広いアプローチ活動で大きなマイルストーンを達成~

Fusion energy: How Ireland is poised to tap into the potential of the 'Holy Grail' of sustainable power (paywall)