EN

Désolé, cette page n'existe pas en français.

ITER Newsline

4613 results found

Tenth anniversary celebration of ITER
20 Nov 2017
Actualité

A prodigious adventure

ITER began its existence as an aspiration in the early 1980s, as actors in the fusion community called for the joint machine that would demonstrate the feasibility of fusion energy. It acquired tangible reality on 21...
Sabina_Macron_small.jpg
20 Nov 2017
Actualité

An impromptu visit

After addressing the UN Climate Change Conference on 15 November, French President Emmanuel Macron toured the colourful COP23 exhibition zone. It was towards the end of his visit that Macron accepted the invitation of...
Cryoplant_Compressor_Installation_1a_small.jpg
20 Nov 2017
Actualité

How to install a compressor

In order to properly install a helium compressor skid on its concrete pad, you need to start with a large push broom to sweep away the dust that inevitably accumulates on the pad's surface.
Pre_compression_ring_squarish.jpg
20 Nov 2017
Actualité

Six rings to counter the force

Work on the pre-compression rings of the ITER magnet system is progressing in Europe, where work on a full-scale prototype is underway. These technically challenging components—made of composite materials—are designed to...
Cop_23_0_ed.jpg
13 Nov 2017
Actualité

Placing ITER on the global scene

On the western bank of the Rhine and not far from the seat of the UN Climate Change Secretariat, world leaders are discussing how to push ahead for international joint action to tackle climate change and implement the...
MEXT_MINISTER.jpg
13 Nov 2017
Actualité

Seeing is believing

On 4 November, ITER received Yoshimasa Hayashi, the Japanese Minister of MEXT—the Ministry of Education, Culture, Sports, Science and Technology with oversight responsibility for Japan's participation in the ITER Project...
ENGAGE: architect-engineer consortium for ITER
13 Nov 2017
Actualité

ENGAGE receives prestigious award

Since 2006, the French "Grand Prix de l'Ingénierie" has recognized engineering projects and/or teams that are remarkable in terms of scope, innovation, complexity, and in their susceptibility to redesign the future.
Ass_Hall_Georges_SSAT_foot_1.jpg
13 Nov 2017
Actualité

One foot inside

The twin Korean giants already have a foot inside the Assembly Hall—literally.
Toward Earth's first burning plasma
30 Oct 2017
Actualité

The Tao of Q

Both the mission and physics of ITER can be reduced to a single letter: Q. To understand the Q of ITER is to understand its most essential operating parameter as well as the raison d'être of the ITER Project.
Feeder team
30 Oct 2017
Actualité

First superconducting component ready for tests

From the outside, it's just another big, shiny stainless-steel pipe bent at a 90° angle. But take off the shipping caps at one end or the other, have a peek inside, and you will see a technological marvel.
K2_IT_Seucrity.jpg
30 Oct 2017
Actualité

Defending ITER's cyberspace

Cybercrime is not just the domain of thriller authors who have exploited the theme since the dawn of the computer age. In today's interconnected world threats from cyberspace are a daily occurrence and everyone...
IO_ESTABLISHED_2007_2.jpg
30 Oct 2017
Actualité

Birth of an organization

In the fall of 2007, clearing and early levelling works—a contribution from the host state, France—were underway on the ITER platform, a design review for the machine had just been completed, and an international team of...
Engaging visitors at the ITER booth
30 Oct 2017
Actualité

ITER meets world science journalists

In an age of information overload, effective communication—reaching new audiences with persuasive, inspiring messages—is an ever-increasing challenge. Communicating on complex science topics has in some ways become...
Tanks_and_Manosque.jpg
30 Oct 2017
Actualité

Last cryogenic tanks from Europe

Eleven storage tanks have been delivered by the European Domestic Agency in the past year for the ITER cryoplant, including two this past week.
Port stub extensions
23 Oct 2017
Actualité

Windows with tailored appendages

Each of the vacuum vessel's 44 openings will have custom-made "extensions" to create the junction to the cryostat. The first link in the two-part chain—the port stub extension—will be welded to the vacuum vessel sectors...
Engie_Ass_Hall_Hook_nef_1_small.jpg
23 Oct 2017
Actualité

Hooked!

Big, powerful cranes need big, powerful hooks.
Managing complexity, slice by slice
23 Oct 2017
Actualité

The elephant must be sliced

Any way you cut it, ITER is fantastically complex. Whether you're counting components or the lines in the machine assembly schedule, or taking a closer look at the project's vast procurement sharing scheme ... complexity...
JPO_1.jpg
23 Oct 2017
Actualité

Front-row experience

Craning their necks to take in the full size of what will be the ITER Tokamak, the crowd reacted spontaneously: "This is much bigger than I thought." "Really impressive!""I've never seen anything like it!" For the 11th...
The heart of ITER’s electrical network
23 Oct 2017
Actualité

Aiming for "zero fail"

If something goes wrong in your electrical installation at home you might lose the contents of your freezer—an aggravating occurrence but not a disastrous one.
Tok_Tags_final_small_web_a.jpg
16 Oct 2017
Actualité

Interior design

Fresh from the offices of the Design & Construction Integration Division, this cutaway drawing peels back the walls to reveal the interior layout of the Tokamak Complex.