Lettres d'information

Choisissez ce que vous souhaitez recevoir :

Merci de renseigner votre adresse de messagerie électronique :

@

Votre adresse email ne sera utilisée que dans le cadre de campagnes d'information ITER Organization auxquelles vous êtes abonné. ITER Organization ne communiquera jamais votre adresse email et autres informations personnelles à quiconque ou dans le cadre d'informations commerciales.

Si vous changez d'avis, il vous est possible de vous désinscrire en cliquant sur le lien 'unsubscribe' visible dans vos emails provenant d'ITER Organization.

Pour plus d'information, veuillez consulter notre Politique de confidentialité.

Actu & Médias


ITER NEWSLINE -

Pour les actualités en français, voir la page Actus & Médias.
Pre-compression ring facility

Ready to exert serious pressure

The tool is ready; the first prototypes are on their way. Soon, a specialized test bench at CNIM (France) will enter into service to verify the resistance of the large composite rings that are designed to "push back" against the forces exerted on the toroidal field coils during operation.

Exerting a total force of 36,000 tonnes to test the resilience of the prototype pre-compression rings: the ITER Pre-Compression Ring Test Facility. © CNIM (Click to view larger version...)
Exerting a total force of 36,000 tonnes to test the resilience of the prototype pre-compression rings: the ITER Pre-Compression Ring Test Facility. © CNIM
At the top and bottom of the machine, where the tapered ends of the toroidal field coil structures meet, large composite rings will be installed to help the coils resist electromagnetic forces during operation.

The material chosen for the pre-compression rings—more than one billion minuscule glass fibres glued together with epoxy resin—has been confirmed through R&D and testing as the most resilient and suitable for withstanding high loads and avoiding the circulation of current. Without the pre-compression rings forces calculated at several hundred meganewtons (MN) would stress the toroidal field coils and, over time, cause material fatigue.

Full-size prototype rings are about to be tested at the ITER pre-compression ring facility, where a tool developed by Douce Hydro (France) in collaboration with CNIM will exert a force of 36,000 tonnes while maintaining a positional accuracy of 0.1 mm. Stress tests will last a few hours and will be supplemented by other tests to confirm that the creep and fatigue performances are also adequate.

Into this futuristic test bench each full-size prototype ring (inner diameter: 5 metres) will be inserted for testing. © CNIM (Click to view larger version...)
Into this futuristic test bench each full-size prototype ring (inner diameter: 5 metres) will be inserted for testing. © CNIM
The test facility and tooling have been procured by the ITER Organization through a contract with CNIM/Douce Hydro; the European Domestic Agency developed the conceptual design of the facility and is procuring the nine ITER pre-compression rings (two sets of three plus one spare set).

Read the original report on the European Domestic Agency website.

return to the latest published articles