Open Tenders
| Référence | Title | Tender process | Current Step |
|---|---|---|---|
IO/25/OT/70001296/LLU |
Open Tender Ongoing |
||
IO/25/OT/70001281/KJT |
Open Tender Closed |
||
IO/25/OT/70001288/LLU |
Open Tender Closed |
||
IO/25/OT/ 10031035 /SCD |
Procurement of analysis services on systems and components of Magnet Feeder |
Open Tender Closed |
|
IO/25/OT/70001282/FMR |
Regulatory Controls of ITER Buildings and Site Infrastructure |
Open Tender Closed |
|
IO/24/OT/10028553/GRD |
Thermal Insulation of Cryostat Elbows Interface with the Tokamak Building (FMR) |
Open Tender Closed |
|
IO/24/OT/ 10030675 /NRE |
Procurement of components for In-Service Inspection System WP2.2 of the ITER Vacuum Vessel |
Open Tender Closed |
|
IO/25/OT/70001264/EBT |
Open Tender Closed |
||
IO/25/OT/10031115/EBT |
Open Tender Closed |
||
IO/25/OT/10031355/JGO |
Supply Contract for ITER Vacuum Vessel Pressure Suppression System Instruments |
Open Tender Closed |
|
IO/25/OT/10031239/JGO |
Supply Contract for ITER Vacuum Vessel Pressure Suppression System Valves |
Open Tender Closed |
|
IO/25/OT/70001263/FMR |
Open Tender Closed |
||
IO/25/OT/70001262/LLU |
Open Tender Closed |
||
IO/25/OT/70001248/ERA |
Open Tender Closed |
||
IO/25/OT/70001261/EBT |
Open Tender Closed |
||
IO/25/OT/10030889/JPK |
Open Tender Closed |
||
IO/25/OT/10031160/CPT |
Open Tender Closed |
||
IO/OT/25/10031165/VML |
Open Tender Closed |
||
IO/25/OT/10031008/FMR |
Open Tender Closed |
||
IO/25/OT/70001220/FMR |
Framework Contract for commissioning and daily inspection of scaffolds |
Open Tender Closed |
|
IO.25.OT.10030526.KRH |
Open Tender Closed |
||
IO/25/OT/10030738/JPK |
Procurement of Duct Liner for Heating Neutral Beam (HNB) 1, 2, and 3 |
Open Tender Closed |
|
IO/24/OT/1-30712/EBT |
Open Tender Closed |
||
IO/24/OT/70001218/EBT |
IO Quality Control at Construction (QCC) Supervision Services |
Open Tender Closed |
|
IO/24/OT/70001205/FMR |
Open Tender Closed |
||
IO/24/OT/70001185/AJI |
Manufacturing and Supply of Base Materials for In-Vessel Parts |
Open Tender Closed |
|
IO/24/OT/70001199/AJI |
Manufacturing of generic diagnostics components (rails, skids, pads, dogleg plates) |
Open Tender Closed |
|
IO.24.OT.10029299.KRH |
Open Tender Closed |
||
IO/24/OT/10028594/AJI |
Procurement of 316L(N)-IG shaped beams and rolled plates for ITER Diagnostics ISS/PCSS Structures |
Open Tender Closed |
|
IO/24/OT/10029715/JPK |
Antenna Transmission Lines Interface Section (ATLIS) prototype and series manufacturing |
Open Tender Closed |
|
IO/23/OT/70000862/EBT |
Open Tender Closed |
||
IO/24/OT/70001179/EBT |
Open Tender Closed |
||
IO/24/OT/10028289/GRD |
Open Tender Closed |
||
IO/24/OT/10027990/AJI |
Supply of LEVI coaxial and triaxial electrical feedthroughs and connectors |
Open Tender Closed |
|
IO/24/OT/ 10028547 /YLI |
Open Tender Closed |
||
IO/24/OT/10028208/EBT |
Open Tender Closed |
||
IO/24/OT/70001114/ADC |
Open Tender Closed |
||
IO/24/OT/70001072/EBT |
Open Tender Closed |
||
IO/23/OT/10025159/AJI |
Development and manufacturing of AR Coating for Diagnostics' Windows |
Open Tender Closed |
|
IO/23/OT/10025154/AJI |
Manufacturing of Quartz Optical components for ITER diagnostic windows |
Cancelled Closed |
|
IO/23/OT/10025157/AJI |
Manufacturing of Sapphire Optical components for ITER diagnostic windows |
Cancelled Closed |
|
IO/24/OT/10029971/YSA |
B2M Cryostat Feedthrough BoxUPDATED |
Awarded Closed |
|
IO/24/OT/10030101/JGO |
Disruption Mitigation System (DMS) Plant System Conventional Control (PSCC) Prototype 1 |
Awarded Closed |
|
OT /24/70001176/VML |
Electrical and lightning protection works (minor electrical works) |
Awarded Closed |
|
IO/24/OT/10029664/FMR |
Awarded Closed |
||
IO/24/OT/70001143/VML |
Awarded Closed |
||
IO/24/OT/10028973/CDO |
Awarded Closed |
||
IO/24/OT/10028984/AJI |
55.NE.X0 Diagnostic Electrical Systems Design Completion and Manufacturing |
Awarded Closed |
|
IO/24/OT/10029210/JPA |
Awarded Closed |
||
IO/24/OT/10029061/JLE |
Awarded Closed |
||
IO/24/OT/10028967/VML |
Awarded Closed |
||
IO/24/OT/10029000/VML |
CAD Collaboration Assistance, Exchanges and SMDD Administration |
Awarded Closed |
|
IO/24/OT/10028971/KRH |
CAD Plant Software Infrastructure and 3D Module Support and Administration |
Awarded Closed |
|
IO/24/OT/10028994/KRH |
Awarded Closed |
||
IO/24/OT/10028972/VML |
Awarded Closed |
||
IO/24/OT/10028966/VML |
Awarded Closed |
||
IO/24/OT/70001109/ERA |
Awarded Closed |
||
IO/24/OT/ 10028957 /YLI |
PBS 45 Fiber Optic Patch Panels TKC (Tokamak Complex) First Plasma Scope |
Awarded Closed |
|
IO/24/OT/70001112/KJT |
Awarded Closed |
||
IO/24/OT/10028674/JLE |
Awarded Closed |
||
IO/24/OT/10028764/ADC |
Awarded Closed |
||
IO/24/OT/10028747/ADC |
Awarded Closed |
||
IO/24/OT/70001106/EBT |
Awarded Closed |
||
IO/24/OT/10028750/JPA |
Manufacturing, Delivery of the Vacuum Vessel Lifting Frames on the ITER |
Awarded Closed |
|
IO/24/OT/10028548/JGO |
Awarded Closed |
||
IO/24/OT/ 10028373 /YLI |
Design and procurement of electric motors and inverters for SMF compatibility tests |
Awarded Closed |
|
IO/24/OT/10028466/LLU |
Enterprise Architect and V&Vsupport service for Diagnostic I&C |
Awarded Closed |
|
IO/23/OT/70001060/FMR |
Awarded Closed |
||
IO/24/OT/10028415/JPA |
Awarded Closed |
||
IO/24/OT/10028232/JPA |
Awarded Closed |
||
IO/24/OT/10028179/JCL |
Awarded Closed |
||
IO/24/OT/10028089/ERA |
Awarded Closed |
||
IO/24/OT/70001063/FMR |
Awarded Closed |
||
IO/24/OT/10028053/JGO |
Maintenance for Toroidal Field Coil In-Pit Installation Tool |
Awarded Closed |
|
IO/24/OT/70001077/EBT |
Awarded Closed |
||
IO/24/OT/10027799/ERA |
Awarded Closed |
||
IO/23/OT/70000989/KJT |
Awarded Closed |
||
IO/23/OT/70001039/FMR |
Awarded Closed |
||
IO/23/OT/70001023/YMA |
Awarded Closed |
||
IO/23/OT/70000994/YMA |
Awarded Closed |
||
IO/22/OT/70000811/GRD |
Temporary Openings Closure Contract for Tokamak Complex Buildings |
Awarded Closed |
|
IO/22/OT/10022446/JLE |
Awarded Closed |
Data Handling Extensions and Maintenance
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
The main components of the data handling ecosystem consist of the data archivers, data access and data processors.
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1429Videoconferencing hardware and Support
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1376CIS Engineering Support
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1425Procurement of analysis services on systems and components of Magnet Feeder
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1395Regulatory Controls of ITER Buildings and Site Infrastructure
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
- Technical Control of Buildings and Civil Engineering Works during Design and Construction (FR:
Contrôle Technique), as per the French standard NF P03-100;
- Regulatory Putting-into-Service Inspections (FR: Vérifications de mise en service, Vérifications
initiales) and In-Service Inspections (FR: Vérifications Générales Périodiques, VGP, Requalifications
Périodiques) of various types of Equipment and/or Installations;
- Miscellaneous Verifications, Inspections, Technical Assistance.
The Scope of Works shall cover Inspections of all Buildings, Equipment and/or Installations built or to be built on the ITER Site, including electrical Equipment and/or Installations, Pressure Equipment, Lifting and Handling Equipment and Tools, etc.
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1423Thermal Insulation of Cryostat Elbows Interface with the Tokamak Building (FMR)
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
The main functions of the Cryostat are to provide a vacuum environment and to support the Tokomak basic machine main components. It is interfacing with the Tokamak Building at the regular and irregular port penetrations through 54 bellows which functions are to ensure the leak tightness between the related environments and to compensate the relative movements between the Cryostat and the Tokamak Building.The layout between the Cryostat Bellows and the Tokamak Building consists of specific embedded plates which are either rectangular or circular. The structural capacity of the embedded plates is currently exceeded due to some thermal loading effects (fire and cryogenic accidents) which are applied directly on these structures. In order to resolve this issue, the scope of work of this tender is to implement thermal insulation at the Cryostat bellows / Tokamak Building interfaces.
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1304Procurement of components for In-Service Inspection System WP2.2 of the ITER Vacuum Vessel
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1375Central Project Controls Support Services
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
There are five types of services foreseen under the contract:
1. Performance Reporting Service.
2. Cost Estimating Service.
3. Performance Baseline Change Control Service.
4. Budget Allocation Change Control Service.
5. Primavera Administration.
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1390Offsite Inspection Services
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1389Supply Contract for ITER Vacuum Vessel Pressure Suppression System Instruments
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
The supply of the VVPSS Instruments is divided into two procurement lots. Depending on the Candidate's capability they may submit a tender covering one or several lots, but as minimum all the scope of one lot shall be covered, split lot or mixed lot will not be accepted by ITER Organization.
Lot 1: Primary Elements
Lot 2: Thermowells and Temperature Sensors
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1386Supply Contract for ITER Vacuum Vessel Pressure Suppression System Valves
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
The supply of the VVPSS Valves is divided into six procurement lots. Depending on the Candidate's capability they may submit a tender covering one or several lots, but as minimum all the scope of one lot shall be covered, split lot or mixed lot will not be accepted by ITER Organization.
Lot No.- Scope of Supply - Quantity of Valves
Lot 1 - Manual & Pneumatic Ball Valves - 24
Lot 2- Manual & Pneumatic Gate Valves -45
Lot 3 -Manual & Pneumatic Globe Valves- 82
Lot 4- Manual & Pneumatic Butterfly Valves - 7
Lot 5- Self-Contained Pressure Reduction Regulator & Needle Valves - 7
Lot 6-Non-Return Valves - 37
Total Quantity of Valves for Six Lots- 202
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1385Bus Transportation Services
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
1. The scope includes bus services to transport ITER staff from Aix-en-Provence and Manosque to and from
the ITER Site on working days (Mondays to Fridays).
2. The provision of a shuttle bus service running inside the ITER Site during lunch hours on working days to
serve the restaurant facilities available on site.
3. The provision of a bus service to escort visiting officials attending ITER meetings from Aix-en-Provence to
the ITER Site throughout the year.
4. The provision of a bus service to carry out site visits throughout the year.
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1388Advanced Protection System development
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
The support services will be ordered under a framework service contract by means of task orders and shall be performed at the Contractor premises.
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1387Engineering Services for Maintainability Analysis
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1383Project Controls Support Services
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1384Design, Manufacturing, Delivery, Site Installation and Acceptance Testing of High Voltage Power Supply (HVPS) for Ion Cyclotron (IC) System
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
========
The scope of this contract is for the Design, Manufacturing, Delivery, Site Installation and Acceptance Testing of High Voltage Power Supply (HVPS) for Ion Cyclotron (IC) System. "HVPS unit" shall be recognized as a functional group supplying DC electrical power to Tetrode based Radio Frequency (RF) Amplifier.
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1382Diagnostic I&C Quality Control and Configuration Management
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
The following activities are foreseen:
- Quality control of the I&C Design documentation
- Quality control of the I&C detail design
- Diagnostic COTS devices management
- I&C database management
- I&C Hardware configuration management
- I&C Software configuration management
- I&C manufacturing follow-up
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1380Procurement and Installation of Load Centre 18
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
This Load Centre includes local LV distribution and 22kV/0.4kV auxiliaries transformer.
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1381Design and Construction of Z5.3 Storage Shelter
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1374Framework Contract for commissioning and daily inspection of scaffolds
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1251CAD Data Quality and Engineering Content Quality Services
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
• CAD Quality Assurance and Quality Control tasks (mainly CATIA/ENOVIA, SSD, AVEVA E3D and Diagram)
• Reviewing and controlling the CAD content of Engineering Work Packages (EWP) and Turn-Over Packages (TOP) dossiers,
• Updating the CAD document from As-Design to As-Built maturity."
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1367Procurement of Duct Liner for Heating Neutral Beam (HNB) 1, 2, and 3
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
• Manufacturing the components for the injectors HNB1, HNB2 and HNB3.
• The delivery on the IO site.
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1363Online Coaching
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1361IO Quality Control at Construction (QCC) Supervision Services
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
performed in preparation for, and during the execution of IO Site construction as described in the attached
technical specifications.
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1362Lifting Services Framework Contract
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1356Manufacturing and Supply of Base Materials for In-Vessel Parts
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
The Supplier is responsible for procurement of austenitic stainless steel (SS316L(N)-IG) raw materials in their different forms (forgings, plates and bars) for the manufacture of in-vessel components for the Equatorial Port Plugs (EPP) # 2, 8 &17 and Upper Port Plugs (UPP) #4, 5 and 6., its delivery to the ITER Site and for ensuring that the product meets the technical requirements defined in the attached Technical Specifications.
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1357Manufacturing of generic diagnostics components (rails, skids, pads, dogleg plates)
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
These generic diagnostics components are:
- The Port Plugs skids assemblies,
- The Port Plugs lateral pads assemblies,
- The in-VV rails assemblies,
- The in-VV dogleg plates assemblies.
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1358COM Visit Guides
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
To support this program, IO aims to procure with this Open Tender qualified visit guides who can guide the tours, explain the project (including basic explanations of ITER science and technology), strictly observe the safety requirements of an active construction site, and manage the customer relations aspects of communication and guiding visits."
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1333Procurement of 316L(N)-IG shaped beams and rolled plates for ITER Diagnostics ISS/PCSS Structures
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
This common procurement will cover the need of first EQ#08 and ports EQ#11, UP#2-7-8, LP#8, and extra quantities for other ports.
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1319Antenna Transmission Lines Interface Section (ATLIS) prototype and series manufacturing
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
- The first part requires the design development, manufacturing, and testing of an ATLIS (Antenna
Transmission line Interface Section) prototype which is a firm part (Phase 1).
- The second part of the contract is optional (Phase 2). It will be released by the ITER based on the
successful completion of the first part of the work. In this second part, the work shall cover the manufacturing and testing of the ATLIS series production and delivery to the ITER site.
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1321Interim Agency Services (re-launch)
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1318Operational Health and Safety (OHS) services
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
-For both Building Owners, a general OHS coordination on the ITER Construction Site:
General Occupational Health Protection and Safety Coordination between the different building owners.
Management of occupational safety risks from interfacing activities within the same area.
Active participation to Emergency response management
-For the ITER Organization, the scope of work is divided in three additional specific activities:
OHS coordination on the ITER platform;
Provision of OHS services, to work in support of ITER OHS section on permanent facilities topics outside
the platform;
Provision of OHS services, to work in support of ITER OHS Section on the ITER facility design related
topics.
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1317Short Term Openings Sealing (STOS) (PGO)
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
• Detailed design of openings sealing/infilling solutions to comply with all the functional, mechanical and interface requirements. Specific design solutions could be developed when complex configurations are encountered.
• Qualification program (including mock-ups fabrication and testing campaign) to demonstrate compliance and performance of the selected sealing solutions against project nuclear safety and technical requirements such as: fire sectorization, confinement, shielding, ageing, decontaminability, seismic loading, etc.
• Realisation of other mock-ups, when needed, to confirm constructability and correct implementation of selected sealing system solution (e.g. high cables saturation ratio, thick walls...).
• Issuance and management of infilling project deliverables such as quality plans, Job Safety analysis, technical specification, execution planning, method statements, installation drawings, installation procedures, inspection plans etc.
• Material supply and onsite sealing/caulking works for mechanical, electrical and mixt systems openings, located essentially in nuclear buildings of ITER site.
• Temporary sealing of mechanical, electrical and mixt systems openings for which final closure will not be required for ITER Augmented First Plasma (AFP) operations, but where at least fire sectorization requirement remains.
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1306Supply of LEVI coaxial and triaxial electrical feedthroughs and connectors
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
•HN type CTMS (Ceramic to Metal Sealing) hermetic electrical coaxial feedthrough used for RF power transmission (item name: Coax-EFT)
•Push-pull type HN coaxial connectors with suitable adaptor which will be mounted on the airside flange (item name: Coax-CON)
•CTMS hermetic electrical triaxial feedthrough used for RF signal transmission (item name: Triax-EFT)
•Push-pull type triaxial connectors with suitable adaptor which will be mounted on both the IVS flange and the airside flange (item name: Triax-RCON)
•Triaxial connectors in the interspace suitable for manual permanent connection with EFT (item name: Triax-MCON)
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1284Design, Assembly, and Operation of Large-Scale Hydrogen-Qualified Laboratory for Testing ITER Prototype Catalytic Hydrogen Reactors
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1277IO staff surveys 2025-2029
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1274Metrology Equipment and Services
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1272Emergency Services
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1256Development and manufacturing of AR Coating for Diagnostics' Windows
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Delivery of coated samples to allow IO to perform qualification tests on AR coated samples (tests on irradiation effects and slow crack growth exponent of the fused silica material) AR coated discs for in
series production
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1143Manufacturing of Quartz Optical components for ITER diagnostic windows
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
It addresses the following items :
- Technical specifications of the raw material, including the definition of additional samples required for material characterization,
- Technical specifications of the polished discs,
- Amount and types of discs to be procured.
- Mechanical testing specifications to be performed in order to guarantee
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1141Manufacturing of Sapphire Optical components for ITER diagnostic windows
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
windows assemblies.
It addresses the following items.
- Technical specifications of the raw material, including the definition of additional samples required for material characterization,
- Technical specifications of the polished discs,
- Amount and types of discs to be procured.
- Mechanical testing specifications to be performed in order to guarantee
Pièces jointes
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1142B2M Cryostat Feedthrough Box
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1326Disruption Mitigation System (DMS) Plant System Conventional Control (PSCC) Prototype 1
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
This system has undergone its Final Design Review (FDR) in March 2024 and it will start its manufacturing phase in 2025. The purpose of this Contract is for the Contractor to manufacture specific prototypes of the DMS control system, being compliant with the required standards, when requested. The tasks will also include software programming and the development of test procedures and reports
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1332Electrical and lightning protection works (minor electrical works)
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1328Conciergerie Services to the ITER Organization
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1323Electrical legal Inspection
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
• Electrical networks and related equipment.
• Lightning protection systems.
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1312MCTB High Vacuum Valve and Baffle
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=131555.NE.X0 Diagnostic Electrical Systems Design Completion and Manufacturing
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1309A3 In Pit Access Platforms
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1301Development of a Propellant Valve Prototype
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1299CATIAV5 / ENOVIAV5 Support and Administration
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1292CAD Collaboration Assistance, Exchanges and SMDD Administration
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
1. CAD Exchanges Support: the activities concern the execution of the CAD data exchanges and peripheral operations gathered in the DET (Data Exchange Task) process applied in the ITER project.
2. CAD Collaboration: assistance to CAD Collaboration specification, monitoring and coordination, to the Specification of CAD Collaboration matters in Procurement Arrangements, Task Agreements, and Contracts. Technical writing of the related Design Collaboration Implementation Forms (DCIF).
3. Support to Diagrams and Drawings management, SMDD: administration of the dedicated tool (SMDD) to perform the checks ensuring the consistency drawings as related to data identification, Bill of Material (BoM) management and Systems components management.
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1294CAD Plant Software Infrastructure and 3D Module Support and Administration
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1293CAD Schematics Applications Support and Administration
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1295Identification and Control of Items
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1297Multi-CAD Platform Development
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
The purpose of this Open Tender is to set up a Service Contract to ensure a CAD data and engineering data consistency between the CAD tools (CAD context) and other project software, by ensuring efficient CAD and Engineering Meta-data exchanges between the IO authoring, allowing CAD designers to work in a Multi-CAD environment (concurrent design...) and allowing several stakeholders to access and view in a Multi-CAD environment.
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1296IT Hardware and Related Services
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
=====
This Open Tender was split into 2 Lots =
Lot 1 has been awarded on: 09/12/2024
Contract signed on: 10/02/2025
Awarded Contractor: SCC France SA
Lot 2 has been awarded on: 03/12/2024
Contract signed on: 30/01/2025
Awarded Contractor: B4Restore A/S
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1289PBS 45 Fiber Optic Patch Panels TKC (Tokamak Complex) First Plasma Scope
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
The Contractor shall perform the work at their own location and deliver products preassembled as indicated.
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1290Business Intelligence Global Support
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
A-Services category: Covers the business intelligence stack
-Evolution and maintenance of Data Warehouse;
- Evolution and maintenance of Data Integration Service;
- Evolution and maintenance of Data Visualization Service: paginated reports, mobile ;reports, KPIs,
dashboards and Power BI reports;
- Evolution and maintenance of Data Management service including Master Data Management Service;
- Evolution and maintenance of Data Analysis Service.
- B-Services category (optional) covers services, Technical Environment and Programming Languages not
limited to the list below:
- Plant Lifecycle Management.
- Service Desk.
- IT Security.
- IT Network.
- IT Telecommunications.
- Database administration.
- Systems Administration.
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1286Procurement and Installation of a Heavy Duty (HD) Robot
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
The scope of work is to procure and install in ITER premises an heavy duty robot for testing purpose. The tasks will consist on choosing and procuring the proper robot, realising the associated safety analysis to design , procure and install the safety system to allow safe use of such robot
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1285Lifting Operator Service
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
The contractor shall operate the Equipment specified below:
- The Cargo Lift operating in the building B11 in the Tokamak Cargo Lift shaft
- The Goods Lift operating in the building B74
The duration of the Contract is a firm three (3) years, with two optional period of one (1) year making the maximum possible duration of the contract to five (5) years.
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1282Procurement of PF5 platform
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1279Systems Engineering Services
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
It is related to the technical implementation of Systems Engineering within ITER project. The main tasks are
functional analysis, requirement management (ex: System Requirement Document update, Project Change
Request impact assessment on requirement documentation), interface management (ex: Interface Sheets
update, Project Change Request impact assessment on interface documentation), Transverse Functions
analysis, safety engineering and transverse technical issue resolution coordination.
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1280Manufacturing, Delivery of the Vacuum Vessel Lifting Frames on the ITER
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
The scope of work for the Contractor would include Supply of VV Lifting Frames. The scope of the contract includes the Manufacturing, Delivery of the Vacuum Vessel Lifting Frames on the ITER site.
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1278Supply Contract for A3 In-Cryostat Platforms
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1276Design and procurement of electric motors and inverters for SMF compatibility tests
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
and delivered to ITER organization (IO) with the objective of performing Static Magnet Field (SMF)
compatibility tests on one AC rotating machine (asynchronous motor) and one Variable Frequency Drive
(VFD). The scope of the delivery also includes the mechanical load connected to the motor shaft and other
equipment in order to obtain a full turnkey system.
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1267Enterprise Architect and V&Vsupport service for Diagnostic I&C
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1270Minor Civil Engineering Works (MCEW)
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
- Building finishes
- Miscellaneous Civil Works
- Engineering Support
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1232Modified Trial, Test and Training Facilities (TTTF)
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
- Site erection on IO worksite (B56) of a reduced TTTF structure;
- Design, manufacturing and installation of additional beams and supports onto the TTTF Structure
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1247Anchor Plates Type A for New Up-ending Tool
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1260Supply of a mobile self-erect crane (FMR)
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
- Designing, manufacturing, delivering, testing, and taking over at the ITER Organization
the crane;
- Providing all necessary manuals and documentation required to operate and maintain the
crane;
- Providing at least two years / 24 months warranty for the crane after taking over date;
- Providing training for the staff of operation and maintenance;
- Providing back-up spares for regular maintenance during and after the warranty period;
- Maintain on a yearly basis the crane.
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1258Absolute Valve Feasibility Study
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1248Canteen Services for ITER Site Framework Contract
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1257Maintenance for Toroidal Field Coil In-Pit Installation Tool
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1245Nuclear Analysis Framework Contract
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1241Compensator Design and Installation Plan
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
1. The first part requires the design, development, build and test of a suitable
compensator. This work shall include the construction of a suitable mock-up for
testing purposes.
2. The second part of the contract is based on the successful completion of the first part
of the work. In this case, the work shall continue to develop an installation plan and
the mock-up shall then be extended to test the proposed installation process. Further
tests will also be carried out on the compensators involved in this installation process.
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1235IT Digital Transformation and Enterprise Architecture
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1234Supply and Installation of Furniture
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1230As-Built Digitalization Solution
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1204Online Platform to Access Codes and Standards
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=1202Temporary Openings Closure Contract for Tokamak Complex Buildings
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form
Process Evolution
Dates Information
Contract Description
*the documents listed in the List of Applicable Documents are available in the link below:
https://owncloud.iter.org/index.php/s/4JkfmQIy44OE934
Password: "TOCC2022"
Pièces jointes
Awarded Company / Consortium
Share
https://www.iter.org/industry/procurement/tenders/open-tenders?tender=946Supply of Disruption Mitigation System Radiation and Stray Magnetic Field Resilient Turbo Molecular Pumps
I-PROC is ITER's new digital procurement system. If you are not yet registered on that platform, click here.
How to apply to this OT is explained in below attachment Expression of Interest form