What’s New

Latin America's first stellarator was officially inaugurated on 29 June 2016.

The small SRC-1 stellarator device was planned and built by the Plasma Laboratory for Fusion Energy and Applications, which belongs to the Costa Rica Institute of Technology (TEC) in Cartago.

The countdown for producing the first plasma was started by a high-ranking government representative from Costa Rica and the TEC President and was witnessed by guests from science and politics. Electronic congratulations had been sent by representatives of international stellarator research from Princeton (US) and IPP at Greifswald (Germany) to mark the advent of the new device.

"Our work is to serve future generations," stated Institute Director Iván Vargas. "If research like this continues to evolve, in the future this technology could be used at a power plant that would take alternative energy to our communities."

The Plasma Laboratory for Fusion Energy and Applications was founded six years ago. It covers the fields of plasma medicine, industrial plasma technology and fusion research. Work hitherto had been concentrated on the small MEDUSA-CR device (Madison Education Small Aspect ratio tokamak), which was taken over from the University of Wisconsin-Madison, and on the preparation of the SCR-1 stellarator.

The investment costs for SCR-1 came to USD 500,000. The plasma vessel and modular coils were made in Costa Rica. The small device aims to attain plasma temperatures of 300,000 degrees Celsius. Latin America's first stellarator now joins the ranks of the stellarators in Australia, Germany, Japan, Spain and the USA.

Source: Max-Planck-Institut für Plasmaphysik, IPP

The latest edition of Fusion in Europe is now available from EUROfusion, the consortium of 29 research organization and universities from 26 European countries plus Switzerland. Updates on the operational campaigns of three European tokamaks and one stellarator, upgrades underway on fusion devices in the UK and France, news from the world of materials research and high performance computing for fusion ... all this and more can be found in the June issue.

Visit the EUROfusion website here.

Four turbines produced for ITER's liquid nitrogen (LN2) cryogenic plant have successfully passed factory acceptance testing and will be delivered to ITER this autumn.

One oil brake turbine and one turbine booster will be installed in each of the cold boxes of the LN2 plant, which is under European procurement.

The liquid nitrogen plant and auxiliary systems will cool down, process, store, transfer and recover the cryogenic fluids of the machine. Two nitrogen refrigerators will be delivered along with two 80 K helium loop boxes, warm and cold helium storage tanks, dryers, heaters and the helium purification system.

In spite of the small diameter of the turbines—not exceeding 15 cm—these tiny pieces of equipment will generate enough cooling power to keep the ITER thermal shields extremely cold. It took Air Liquide contractor Cryostar (France) eight months to complete fabrication.

Image: One turbine booster, fully assembled for factory testing.

See the original article on the European Domestic Agency website.