EN

Désolé, cette page n'existe pas en français.

ITER Newsline

4613 results found

Fritz_Lincke_2_small.jpg
14 Jan 2019
Actualité

A partner in identifying solutions

ITER's new internal auditor Friedrich Lincke goes where his expertise is needed to make a difference. Armed with valuable experience from many years of service in large national and international settings, he wants to be...
Assembling a huge tool
14 Jan 2019
Actualité

A 12-tonne beam, a crane and a little push

There is nothing remarkable about lifting a 12-tonne beam. Except when it happens in the spectacular setting of the ITER Assembly Hall, and the beam needs to be fitted with extreme precision into a structure as...
Tada_NFRI.jpg
14 Jan 2019
Actualité

Skilled candidates wanted

In 2018 the number of staff members employed by the ITER Organization increased to 858, as skilled and qualified candidates joined from each of the seven ITER Members. With major machine assembly activities beginning...
Cold testing of Japanese winding pack
7 Jan 2019
Actualité

First ITER magnet arrives this year

A major milepost is projected for 2019 as the first of ITER's powerful, high-field magnets is scheduled to arrive from Japan. Let's take a look behind the scenes at the last-stage fabrication activities that are...
First insertion
7 Jan 2019
Actualité

Insertion is a success

The first superconducting winding pack made in Europe for ITER's D-shaped toroidal field coils is now ensconced in its 200-tonne protective case. The first-of-a-kind insertion operation was carried out successfully at...
RF_PF_DPs_6456.jpg
7 Jan 2019
Actualité

Winding activities end in Russia

Specialists of the Sredne-Nevsky Shipyard and the Efremov Institute in Saint Petersburg have completed the eight double pancake windings required for poloidal field coil #1. After the vacuum pressure impregnation of each...
Building the ITER central solenoid
7 Jan 2019
Actualité

Module #1 nears completion

US ITER and contractor General Atomics recently achieved a major milestone in the fabrication of the ITER central solenoid, completing vacuum pressure impregnation (VPI) on the first production module. The VPI process is...
Handover of heat rejection system infrastructure
7 Jan 2019
Actualité

Strategic and symbolic buildings change hands

Constructing and delivering the installation's buildings to the ITER Organization is a major part of Europe's contribution to the ITER Project.
Night shift
17 Dec 2018
Actualité

When dusk falls

There is a magic moment at dusk when the ITER site lights up and the sky still retains some of the light of day. Details that were washed out by the intense daylight or buried in the deep shade jump to the eye as warm...
B2_Diag_Bdg_White_1_small.jpg
17 Dec 2018
Actualité

Under, over and beside the tokamak

In the immediate vicinity of the machine—in the deep vaults of the Tokamak Complex or under the high rafters of the Assembly Building—construction teams are preparing for 2019 assembly-related activities. Whether it is...
Cryostat_Base_1.jpg
17 Dec 2018
Actualité

Home stretch for base and lower cylinder

Just over two years after the first welding activities were initiated in the Cryostat Workshop at ITER, Indian Domestic Agency contractors are executing the final assembly tasks on the two lower sections of the cryostat...
Heat_Rejection_2.jpg
17 Dec 2018
Actualité

Support for the machine

A tokamak would be a lifeless machine if it was not supported by a significant industrial infrastructure. On the ITER platform close to 40 buildings host the equipment and systems that make burning plasma experiments...
TFTR's legacy
17 Dec 2018
Actualité

"US should remain in ITER"

The US National Academies of Sciences, Engineering, and Medicine has completed a multiyear study of the overall status of magnetic confinement fusion research in the United States. Its recommendation? Continued US...
Princess_Thailand_5.jpg
17 Dec 2018
Actualité

A Princess Royal with a passion for science

Her Royal Highness Maha Chakri Sirindhorn of Thailand is a princess with a passion for science, development and education. The daughter of King Bhumibol the Great, who reigned for more than 70 years over the Southeast...
Mayor_BB_tree_lighting_2_smaller.jpg
17 Dec 2018
Actualité

Ringing in the festive season

A beautiful Christmas tree set in the middle of a Provençal nativity scene in the ITER lobby has brought the festive season to ITER. The tree is a gift of the mayor of Saint-Paul-Lez-Durance, Roger Pizot, who turned the...
Momentum_graduates_2_small.jpg
10 Dec 2018
Actualité

MOMENTUM believes in recent graduates

It is rare for students to leave university and immediately begin work on a globally significant project. But thanks to the graduate program run by the project's Construction Management-as-Agent (CMA) contractor...
CFT-in-place_2_small.jpg
10 Dec 2018
Actualité

Big steel elbow in place

A cryostat feedthrough delivered by the Chinese Domestic Agency has become the first metal component of the machine to be installed in the tokamak pit, in an operation orchestrated over two weeks by the ITER Organization...
MITICA beam source
10 Dec 2018
Actualité

Europe awards EUR 20 million contract

The contract, awarded to ALSYOM-SEIV (ALCEN group, France), launches the manufacturing phase for the beam source that will come on line in 2022 as part of the full-power, full-scale test bed for ITER neutral beam...
Dabbar_1a_small.jpg
10 Dec 2018
Actualité

US Under Secretary of Science tours site

Five months, almost to the day, after the US Secretary of Energy Rick Perry visited ITER, his deputy, Under Secretary for Science Paul Dabbar, stood by the same vast windows in the Director-General's meeting room, taking...
JET mirrors ITER's plasma-facing materials
10 Dec 2018
Actualité

D and T to meet at JET in 2020

In 2020, for the first time in more than 20 years, a reaction that only occurs in the core of the stars will be produced on Earth in a man-made machine. In the European JET, the largest tokamak presently in operation...