Choisissez ce que vous souhaitez recevoir :
Merci de renseigner votre adresse de messagerie électronique :
ITER NEWSLINE 288
tokamak cooling water system (TCWS) piping as well as the completion of the final design of the largest TCWS components such as the pressure vessel, pumps and heat exchangers. The agreements, signed on 31 October, describe the transfer of responsibility from the US Domestic Agency to the ITER Organization for the execution of the design, procurement and pre-assembly of TCWS piping and the completion of the final design of the system.
In 2009 the ITER Organization and US ITER signed the Procurement Arrangement for the TCWS. While the global responsibility for this procurement remains unchanged, the agreements signed last week allow TCWS piping to become part of one centralized procurement for all ITER piping equipment—some 60 km of pipes (1,700 tonnes), approximately 4,000 valves and 400 tonnes of pipe supports.
"This centralized approach permits the ITER Organization to occupy the role of unique design authority and Nuclear Operator in its interfaces with the French Nuclear Regulator (ASN), thereby mitigating the risk for potential impact on cost and schedule for procurement and assembly," explains Giovanni Dell'Orco, Cooling Water System Section leader. Another important advantage he sees is the option now to have the pre-assembly and pre-testing of the system performed in a local workshop, which will simplify the final assembly on site.
As for the largest TCWS components, they will still be manufactured under US Domestic Agency responsibility and delivered to the ITER site. However, their design will be finalized and their integration overseen by the ITER Organization. "We hope that by doing it this way the integration of these systems will be facilitated, given the stringent safety requirements and the complexity of the interfaces with many clients."
The next important steps are to agree on a project plan for the cooling water system centralized piping procurement and the TCWS final design, and to organize periodic meetings for the coordination of these activities.
The release concerns the acquisition of raw material (18 HTS tape unit lengths) for the fabrication of HTS current leads, the components that will transmit current from room-temperature power supplies to very low-temperature superconducting coils.
Raw material acceptance is just the first in a long series of control points, or "hold points," that are part of the specifications included in every Procurement Arrangement signed between the ITER Organization and the Domestic Agencies. The traceability of each one of these steps, and the quality assurance and quality control (QA/QC) documents that go with them, must be ensured during the fabrication of the ITER magnets systems—not only the coils, but also the feeders, magnet supports and instrumentation.
Thanks to an in-house collaboration between the ITER Magnet Division and the Project Information System Section (IT), a web-based application under development since 2012 is now available to monitor the magnet Procurement Arrangements as well as the contracts concluded directly by the ITER Organization.
"Building on the success of the Conductor Database that enabled the efficient monitoring of strand/cable/jacket/conductor production," explains Arnaud Devred, section leader for Superconductor Systems & Auxiliaries, "we have developed a Manufacturing Database for the other magnet Procurement Arrangements underway and the direct contracts for magnet instrumentation."
"The idea is to simplify the work of the Domestic Agencies and their suppliers, and provide the traceability and transparency that are required by ITER Organization quality procedures. By centralizing the data and the documents needed for clearing each hold point, and by storing the information in a user-friendly manner, we eliminate innumerable paper and email exchanges."
The Magnet Manufacturing Database (see schema) keeps track of the properties, reports and certificates associated with each step of the manufacturing process. Technical information on raw materials, records on procedures such as welding and testing, inspection certificates, final product documentation and shipment information can all be stored and accessed in the database.
Implementation of the database was premiered in China and for some of the magnet instrumentation contracts. "We hope that it can be deployed in the same collaborative manner for all magnet fabrication," stresses Arnaud.
Outside of the Magnet Division, other ITER Organization groups have shown interest in the Manufacturing Database as a model for monitoring complex Procurement Arrangements.